Home Products & Solutions Satellite Terminal

Airborne Satellite Phased Array Terminal LC6100

Release time:October 29, 2026

LC6100 airborne satellite phased array terminal

The Airborne Satellite Phased Array Terminal is a compact electronically steerable flat-panel antenna system designed for high-speed satellite broadband connectivity on airborne platforms. Supporting Ka-band LEO satellite networks and 3GPP NTN waveforms, it provides fast beam steering, Doppler compensation, and reliable connectivity for aircraft, UAVs, and other mobile platforms.

Technical Specifications

ParametersValues (Preliminary)Comments
Satellite CompatibilityLEO only
Air interface: NTN waveform as defined in 3GPP Release 17 and Release 18, Release 19
Support Doppler compensation for high-speed LEO tracking
Antenna ArchitectureElectronically steerable phased-array flat-panel antenna. 2D electrical scanning.
Number of Beams1T1R
Channel BWDL 100 MHz, UL 50 MHz
Duplex SchemeHalf-duplex (TX/RX TDD shift schedule)
Operating Frequency BandsTx: 29–31 GHz
Rx: 18.5–21.2 GHz (Ka band)
DL: 27.5–31 GHz (expandable)
UL: 17.7–21.2 GHz (expandable)
Peak EIRP at Boresight≥39.2 dBW
EIRP Roll-off vs Elevation-6.5 dB @ 60°
G/T at Boresight9.2 dB/K @ 18.5–21.2 GHz
8.7 dB/K @ 17.7–18.5 GHz
Sky temperature: 35 K
G/T Roll-off vs Elevation-6.5 dB @ 60°
Circular PolarizationDL (RX): RHCP; UL (TX): LHCP
Axial Ratio (AR) at Boresight≤2 dB
AR vs Elevation6 dB @ 60°
Beam Steering RangeAz. 0°–360°; El. 30°–90°
Beam Switching Latency<1 msTime from ACU modem command reception to full steering completion
Beam Tracking MethodConical scan tracking
DL/UL Data Rate per Channel125 Mbps (DL), 20 Mbps (UL)
UL minimum throughput (worst case): 30° elevation / 450 mph (with aircraft fairing)
Stand-by Mode SupportSupportedTransition to standby mode under conditions where air intake is available
Initial Satellite Acquisition Time≤90 s
Re-acquisition Time after Blockage≤20 s
Half-duplex Switching Trigger SignalTrigger signal: separate Tx/Rx/Ref. implementation
Duty cycle configurable
Tx/Rx guard time configurable
Default
Duty cycle: 7 (Tx), 3 (Rx)
Guard time: TBD
Test point implementation (Tx/Rx/Ref.)
DC Input Voltage24 VDC ±10%Aircraft power compatibility
IMU/GNSS Redundancy (Galileo/GPS)SupportedNot required if GNSS is provided by aircraft avionics
Mechanical Dimensions (W × L × H)298.5 × 259 × 38.5 mm (≤3 liter)Includes radome, thermal plate, PSU volume
Weight≤5 kg

Inquire